servo worm reducer

EP offers a complete selection of modular servo gearboxes /worm reducers. The modular design permits configurations with motor insight flange and productivity pinion for rack and pinion drives, and also solid outcome shafts, Hollow bore result, and suggestions shafts for all other positioning applications. The modular style allows for common mounting of the gearbox in virtually any orientation.
Servo-Worm Reducers were particularly developed for employ with the most recent servo motors found in applications that demand specific positioning and repeatability.
These reducers are ideal for applications in materials handling, automation, equipment tool, and robotics.
The light-weight modular aluminum housing design permits easy machine integration, and excellent heat dissipation. A wide variety of insight flanges and couplings can be found to permit easy mounting of almost any servo-motor and custom made flanges could be accommodated. Output configurations with pinion, hollow bore, or stable shaft are available and may be configured for suggestions with motor flange, free of charge suggestions shaft, or both free of charge input shaft and motor flange.
An optimized worm gear tooth design insures substantial efficiency while at exactly the same time decreasing backlash. Two levels of backlash are available, Precise or Extra-exact, with backlash levels to less than 3 arc minutes.
Available in 6 sizes
Ratios from 2 to 60:1
Torque Potential up to 4400 Lb.-Ft. (6000 Nm)
Input Speeds up to 6000 RPM
Two backlash amounts – Precise and Extra-precise.
Modular design appropriate for rack & pinion system
4 input styles
7 output styles
28 possible standard configurations
Features
Wide variety of servo gearboxes, designed to fit virtually all servo motors on the market
Designed for the highest torsional stiffness and the cheapest angular backlash, designed for the utmost torque and overhung loads
Bush with slot machines and hub clamp for servomotor coupling
Benefits
Enhanced dimensional compactness due to direct servomotor coupling
Widest range of feasible servomotors coupling dimensions.
The right technical solution because of a comprehensive range of sizes, gear stages, transmission ratios, designs and nonstandard designs.
High-Torque (HT) Servo-Worm Reducers
This standard range of Servo-Worm Reducers are exquisite for use in applications that demand high performance, repeatability and precise positioning. They were particularly developed for work with with state-of-the-art servo engine technology, providing limited integration of the engine to the machine. Angular backlash of significantly less than 1 arc-minutes is provided standard.
They can be purchased in four sizes (50 mm to 100 mm center length) with input speeds up to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide range of motor couplings and mounting flanges are for sale to assembly to almost all servo motors, and the hollow bore output can be used to mount result shafts, pinion shafts, or other drive elements.
Regular applications for these reducers include precision rotary axis drives, traveling gantries & columns, material handling axis drives, zero-backlash axis drives and electronic digital line shafting. Industries served include Material H, Automation, ling, Machine Instrument, Aerospace and Robotics.
Gearing: Internal gear design was optimized to supply an angular backlash of significantly less than 1 arc-minutes in assembly, with the option of “in the discipline” adjustable backlash in the event necessary.
Bearings: Input angular call bearings for high input speed, and robust productivity tapered-roller bearings for superior radial and axial load ability.
Housing: Light weight aluminum housing once and for all heat dissipation, with integral suggestions flange for servo motors and general mounting on any encounter.
Output: The outcome bore is available with a compression-type hub or a good ISO 9409-1 flange (see dimension pages). We give a line of gadgets to adjust these outputs to straight shafting, Rack & Pinions, or other gearing types.
This gearbox utilizes a 30:1 ratio worm-get reduction for applications that require extremely slow and smooth rotational motion. The worm-drive design not merely minimizes backlash but also eliminates back-traveling the gearmotor so a position can be kept even when power isn’t applied. The precision surface 3/8” stainless steel result shaft is backed by dual 3/8” ABEC 5 ball bearings to aid lots from any orientation. The ¼” ABS plastic and lightweight aluminum structure provides a rigid framework without adding unneeded weight and is conveniently mounted to any flat work surface by utilizing the base mounting tabs. Our Regular Spur Gear motors will continue to work with this gearbox (motor sold separately). The Vertical Shaft Worm-Drive Gearbox is perfect for turn-tables, time-lapse systems and low-quickness applications that want high accuracy and torque.
Motor RPM required = 1 / (moments per rotation desired / 30)
Example: 1 / (ten minutes per rotation / 30) = 3 RPM motor had a need to achieve ten minutes per rotation (at max speed)
now offers an economical right position gearhead for make use of with small NEMA 23 through 56 and similar compact metric servo and stepper motors. These reducers will be most appropriate for basic action and source speeds of 2000 rpm where profile software costs certainly are a major consideration.
7 sizes with torque capacities up to 684 Nm
12 exact single stage ratios from 7:1 to 100:1
2 stage ratios available
Inch or metric result shafts
Hollow output standard, place shafts optional
2D and 3D drawings obtainable online
Flexible servo motor interface
Clamp-style hub provides zero-backlash electric motor shaft connection
Aluminum diecast casing for low weight
Large output bearings accommodate larger radial loads
Inch or perhaps metric hollow bore with keyway, single and dual plug-found in shafts also available
Double lip output seals provide maximal protection against contaminants
Face or base installation choices, bolt on flanges and torque hands also available
Bronze wheels cast on the productivity shaft for higher strength
Hardened and floor worm shaft provides easy operation
Reducer completely sealed for general mounting and long-life lubrication
Two bearing worm support isolates motor bearings from radial and axial loads
Flexible coupling aspect eliminates motor misalignment and bearing wear
Worm Gears are ideal angle drives providing huge quickness ratios on comparatively short center distances from 1/4” to 11”. When correctly installed and lubricated they function as quietist and smoothest running type of gearing. Due to high ratios likely with worm gearing, optimum speed reduction can be accomplished in much less space than a great many other types of gearing. Worm and worm gears are powered by nonintersecting shafts at 90° angles.
EFFICIENCY of worm gear drives depends to a big degree on the helix angle of the worm. Multiple thread worms and gears with larger helix angle prove 25% to 50% better than single thread worms. The mesh or engagement of worms with worm gears produces a sliding action triggering considerable friction and greater loss of efficiency beyond other types of gearing. The utilization of hardened and floor worm swith bronze worm gears raises efficiency.
LUBRICATION can be an essential factor to improve efficiency found in worm gearing. Worm equipment action generates considerable warmth, decreasing efficiency. The quantity of ability transmitted at a given temperature raises as the performance of the gearing boosts. Proper lubrication enhances efficiency by minimizing friction and heat.
RATIOS of worm equipment sets are dependant on dividing the amount of teeth in the apparatus by the amount of threads. Thus one threads yield bigger ratios than multiple threads. All EP. worm gear sets can be found with either left or right palm threads. EP. worm gear sets are offered with Sole, Qua, Triple and Double-druple Threads.
Safeness PROVISION: Worm gearing should not be used as a good locking mechanism to carry heavy weights where reversing actions could cause harm or damage. In applications where potential damage is non-existent and self-locking is preferred against backward rotation then use of a single thread worm with a low helix angle quickly locks the worm gear drive against backward rotation.
Materials recommended for worms is definitely hardened steel and bronze for worm gears. Nevertheless, depending on the application unhardened metal worms operate adequately and even more economically with cast iron worm gears at 50% horsepower ratings. Furthermore to metal and hardenedsteel, worms can be found in nylon, lightweight aluminum, stainless and bronze; worm gears can be purchased in steel, hardened metal, stainless, light weight aluminum, nylon and non-metallic (phenolic).
EP also sells equipment tooth measuring equipment called GEAR GAGES! Gear Gages lessen mistakes, save money and time when identifying and ordering gears. These pitch templates are available in nine sets to identify all the common pitch sizes: Diametral Pitch “DP”, Circular Pitch “CP”, Exterior Involute Splines, Metric Module “MOD”, Stub Tooth, Fine Pitches, Coarse Pitches and Unusual Pitches. Refer to the section on Equipment GAGES for catalog figures when ordering.

Tags

Reducers-worm

As one of leading reducers-worm manufacturers, suppliers and exporters of mechanical products, We offer reducers-worm and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of reducers-worm.

Recent Posts

 

 

Above information is just for sharing of knowledge and introduce of products and manufacturers. non-commercial purpose. All content get from the network, the article is our perspective, if there is any violation of the copyright or you found objectionable information, please contact me, we will immediately delete it. The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. John Deere® Comer Gearbox ® Bush Hog Gearbox® Omni Gear® etc. are for reference purposes only and for indicating product use and compatibility and replacement of original broken parts. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM. reducer-worm.top All rights reserved.  Addr:Khartoum, Sudan