worm motor

Worm drive gearbox with motor
worm motor
A robust worm-drive gearbox powered by an MM28 electric motor. Ideal applications where an easy to fit, high torque outcome is required. Ideal for student based projects including robots and buggies.
The machine has been designed to ensure that the output shaft can be ‘clicked’ in and out for modification. Electronic.g. reducing to size. The engine is snap installed into its cradle to engage the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine isn’t turning. The high gear ratios of 216:1 or 336:1 get this to gearbox appropriate for small strolling robots, lifting mechanisms, and various other applications where great torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draw up to some amps, making them ideal applicants for the DRV8833 motor driver carrier. Electric motor overheating can be caused by excessive stalling, even at suprisingly low voltages. We advise that you utilize stall-detection sensors, or simply watch your robot, to make sure that it doesn’t stall for lots of seconds at the same time.
This gearbox has a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also fits on the smaller threaded end of the shaft, though it is not especially intended to work with this type of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors will be economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical right position worm geared motors arranged new criteria for reliability, performance and economic climate with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly style provides for easy integration today and a really future proof remedy. The Ever-Power gear engine offers total flexibility in mounting options includes shaft, base, encounter, and flange alternatives. The motor terminal box could be mounted in alternative positions rotated in 90º steps around the electric motor frame providing for unparalleled integration options.
Ever-Power gear motors adhere to UNITED STATES and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a genuine total option for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose proof,and can be used outdoors or in wet and dusty conditions without the use of additional enclosures. Full rated output is available at the output shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With integrated inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the option for applications requiring a good part turn, optional dual result, or an inability for the engine to be back driven. The DC correct angle gear motors are made for constant and intermittent duty procedure. Our right angle equipment reducers are designed with many mounting plate options, making them well suited for a number of DC electric motor based applications. We offer 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ time (varies by application)
EP Products Worm Gear Motors are created to generate high torque in a little package size. Worm Equipment Motors are great for applications that want a self- locking or breaking characteristic since the result shaft can’t rotate when there’s no power applied. On top of that, Worm Gearheads can transfer movement in 90 degrees. With various decrease ratios, precision cut gears, voltages and sizes, EP Items includes a DC Worm Equipment Motor solution for your application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Equipment Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks / Industrial Conveying Systems / Security Gates / Dental care Seats / Ambulance Cots & Stretchers Quite a few DC Motors could be complimented with one of our Worm Gearheads. EP Products will continue to work with you to create and produce a Worm Gear Motor that may optimize the functionality of your specific application.
Built to your unique requirements
Engine Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Slice / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm motor uses a metal gear box for durability and a higher torque output. Because of the special mechanical framework of the worm travel the electric motor output shaft can be self locking and can not be rotated.
This part uses a two wire connection and supports direction control as well as PWM speed control. Ranked voltage is 12v and will obtain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear models from EP DRIVESYSTEMS especially display their strength in applications where large gear ratios are essential. Our worm geared motors are consequently optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions allow simple and efficient cleaning of the travel system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular style give users maximum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are many applications that require drive systems, and each one of these has its own unique requirements. The EP series worm gear motors can be quickly and efficiently adapted to satisfy your needs.
Worm gear units impress with their great power density and compact design. If required, we are able to also source them with the highly effective nsd tupH surface area treatment.
In addition to the basic EP casing, we offer an extensive type of bolt-on parts to customize the merchandise including torque arms, shaft covers and output flanges. These could be easily field set up, but we may also be pleased to assemble the individual components for you.
Find out more about our modular SI worm geared motors!
Find out more
Smooth and Clean: The EP worm gear unit SMI
SMI worm gear systems feature a smooth, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface area conversion makes this product ideally suited for harsh and demanding industries like food processing and pharmaceuticals.
Flexible input designs such as for example NEMA, IEC or direct motor mounts in extra foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared motor program. The units have got on all sides diverse fixing possibilities and enable a simple assembling for the client.
Other drive configurationscan be designed by use of built-in components (e.g. torque arm and output flanges). The housings are created in light weight structure out of aluminium die cast. Engine attachment is realised generally by way of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Engine – incorporating the following features: 1 to 6V voltage ranking, 17100 rpm no load swiftness, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm vast, 40mm high, a good robust worm get gearbox powered by an MM28 electric motor (included), most suitable for applications where a simple to match, high torque outcome is necessary, nylon housing and gear, requires light oil or silicon grease lubrication, well suited for student based tasks including robots and buggies.
Most ideal for applications where a simple to fit, high torque output is required
Perfect for student based tasks including robots and buggies
Reversible Substantial torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible Substantial torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Features:
The motor is Gear DC engine with micro-turbine worm, you can transform the wiring-connection to improve motor rotation.
Turbo worm geared engine with self-lock, that is, regarding motor without electric, the end result axis is usually fixed, self-lock.
The reducer output shaft arranged vertically with the electric motor shaft, whole engine output shaft relatively-short than general gear electric motor, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windows, door, Mini winch. Ect.
In sumo robot or combat robot competition where great holding torque’s engine is essential to avoid your robot being pushed by your opponent robot. The worm equipment is definitely an improved option when compared to spur gear motor. How come worm gear so special? Check this wiki out: Worm Get.
“Unlike with ordinary equipment trains, the direction of transmission (insight shaft vs output shaft) isn’t reversible when using large reduction ratios, because of the increased friction involved between your worm and worm-wheel, when usually an individual start (1 spiral) worm can be used. This can be an advantage when it is desired to remove any possibility of the output driving the input.”
In other words, it is hard to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g

Tags

Reducers-worm

As one of leading reducers-worm manufacturers, suppliers and exporters of mechanical products, We offer reducers-worm and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of reducers-worm.

Recent Posts

 

 

Above information is just for sharing of knowledge and introduce of products and manufacturers. non-commercial purpose. All content get from the network, the article is our perspective, if there is any violation of the copyright or you found objectionable information, please contact me, we will immediately delete it. The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. John Deere® Comer Gearbox ® Bush Hog Gearbox® Omni Gear® etc. are for reference purposes only and for indicating product use and compatibility and replacement of original broken parts. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM. reducer-worm.top All rights reserved.  Addr:Khartoum, Sudan